Wind Power Monitoring System - 3onedata|Wind Power Monitoring System|Industrial Ethernet switches|Ethernet|USB|RS485|RS232|media converter|optic fiber modem|protocol converters|video converters
  • TEL:400-880-4496
  • CN|EN
 
Product Classification
Product Model
Wind Power Monitoring System
Background
With the global warming, energy conservation and development of green energy has become a global trend. The development of new energy has brought about environmental protection, reducing the air pollution caused by coal combustion. With the construction of a large number of wind farms, the SCADA monitoring system of wind power station, the video security system of the wind field, and the remote monitoring system of wind power generation units are also used. The wind power monitoring system is responsible for the management of the operating data, state, protection device, fault type, etc. All kinds of information data is transmitted to the monitoring center through the Ethernet, and the host can communicate the control commands to the fan controller, and realize the remote monitoring function. The wind field disturbance is serious, the environment is bad, need to manage the wide temperature industrial Ethernet switch to carry on the network support, and it can provide a stable, long time communication in the harsh outdoor environment. 
Project requirements
The switch can meet the dry or wet conditions of the wind field.
Communication equipment can effectively prevent the wind turbine power generation EMI/EMS interference.
Equipment can be stable, safe, no fault operation. Must be able to connect to many serial devices, and completely integrate the devices with an Ethernet network.
The system must exhibit high reliability and performance, and be easy to maintain.
System Diagram
Scheme introduction
The industrial Ethernet switch IES215-1F is installed in the top and bottom of the wind tower, the two switches IES215-1F is connected with an optical fiber. The switch IES215-1F in the top of wind turbine, RJ45 port is used to connect the PLC and Variable pitch controller. The switchIES215-1F in the bottom of wind tower, RJ45 port is used to connect the Industrial Ethernet switch IES618-2F in the Box type substation. Box type substation by fiber interface for managed switches and other box type substation switch optical connection, consisting of fast Ethernet redundant ring network, which can guarantee fast network self-healing and improve data transmission security, reliability and anti-interference ability. Data is transmitted to the monitoring center through the switch IES618-4F, and the monitoring center adopts Managed Industrial Ethernet switch IES5024-12F.
Scheme advantage
The switch uses industrial grade design, no fan, low power consumption, support for -40~75℃ working temperature, metal shell, IP30 protection class. 
Support a variety of installation methods. 
Better than IES61850-3 anti electromagnetic interference ability.
SW-Ring (recovery time < 20ms at full load).
IES215-1F
·Support 4 port 10Base-T/100Base-TX Ethernet and 1 port 100Base-FX
·Support IEEE802.3/802.3u store and forward
·Support Ethernet 10/100M self-adaption
·12~48VDC wide voltage power supply input
·No fan, low consumption design, -40~75℃ working temperature
·IP40 protection, high strength metal shell, DIN rail mount
IES618-4F
·Support 4 RJ45 Ethernet ports and 4 Fiber ports.
·SW-Ring (recovery time < 20 ms at full load)
·Port-based VLAN, IEEE 802.1Q VLAN to ease network planning
·Support IEEE802.1p_QOS, RSTP
·Support IGMP, Port Trunking and Port mirroring function
·Support WEB management, easy- to-use
·Design for industrial Level 4 standard
IES618-2F
·Support 6 RJ45 Ethernet ports and 2 Fiber ports.
·SW-Ring (recovery time < 20 ms at full load)
·Port-based VLAN, IEEE 802.1Q VLAN to ease network planning
·Support IEEE802.1p_QOS, RSTP
·Support IGMP, Port Trunking and Port mirroring function
·Support WEB management, easy- to-use
·Design for industrial Level 4 standard
IES5024-12F
·Support 12 RJ45 Ethernet ports and 12 Fiber ports
·SW-Ring (recovery time < 20 ms at full load)
·Port-based VLAN, IEEE 802.1Q VLAN to ease network planning
·Support RSTP, SNMP, IEEE802.1p_QOS
·Support IGMP, Port Trunking and Port mirroring function
·Support WEB management, easy- to-use
·Design for industrial Level 4 standard
·IP 30 protection, rugged high-strength metal case
NP301
·3-in-1 RS-232/RS-485/RS-422 serial interface.
·Support 10/100M auto-sensing Ethernet
·Support 300bps~115.2Kbps
·Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol
·Support across gateway, router communication
·Support standard TCP/IP SOCKET
·Choice of configuration methods: Windows, TELNET and WEB

close