SW485WA

Port-powered RS-232 to RS-485 Converter

 

 

 Support bidirectional data conversion between 1 RS-232 serial port and 1 RS-485 serial port 

 Support 1500V photoelectric isolation

 Unique port-power technology, no need for external power supply

 The rate is up to 38400bps, support 128 nodes

 Automatic serial port signal rate detection, zero-delay automatic forwarding

 Support -40~80℃ wide operating temperature range

 Compact size, easy installation

 

SW485WA is an industrial-grade pocket RS-232 to RS-485 interface converter, which can implement bidirectional data conversion between serial port RS-232 and RS-485, and provide 1500V photoelectric isolation protection without the need of external power supply. It provides a RS-232 serial port and a RS-485 serial port equipped with 600W surge protection and 15kV electrostatic protection, which can effectively prevent device from being damaged.


The RS-232 port of SW485WA adopts hole-type DB9 interface, which could connect to PC directly and obtain power from PC serial port via TXD, RTS and DTR signal lines. RS-232/485 bidirectional conversion could be implemented, even though it’s only powered by TXD signal. Regardless of whether the signal is high or low, SW485WA can obtain enough power from those data/handshake signals.


The design of SW485WA complies with the requirements of industrial standard. It could be wildly used in electric power system, industrial automation control and IC card charging system. 

 
Serial Port

 

Standard: EIA RS-232C, RS-485

Serial port quantity: 1 RS-232 serial port, 1 RS-485 serial port 

RS-232 signal: TXD, RXD, GND

RS-485 signal: D+, D-, GND

Interface type: RS-232 serial port, adopts DB9, Female

RS-485 serial port, adopt 3-pin terminal blocks

Transmission distance: RS-232 serial port, 15m

RS-485 serial port, 1200m

Direction control: RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically 

Load capacity: RS-485 supports 128-point polling environment

Interface protection: 600W surge protection, 15kV electrostatic protection

Photoelectric isolation: 1500V

 

 

Power

Requirement

 

 

No external power supply required

Device obtains power from TXD, RTS, DTR signals of RS-232 serial port

 

Power

Consumption

 

Static power consumption: ≤20mA

Dynamic power consumption(mean): ≤50mA

 

Environmental

Limit

 

Operating temperature: -40~80℃

Storage temperature: -40~85℃

Relative humidity: 5%~95%(no condensation)

 

Physical

Characteristic

 

Housing: plastic

Dimension (W x H x D): 82mm×33mm×16.5mm

Weight: 50g

 

Certification

 

CE, FCC, RoHS

 

Warranty

 

3 years

 

  

 

 

 

Available Models RS-232  RS-485 Power Supply
SW485WA 1 1

-