FL485

RS-485 Signal Surge Protector

 

 

 Support 1 RS-485 signal input and output, and provide 5kA surge protection


 Adopt multilevel protective circuit with quick response and low residual voltage output


 Response time is less than 1ns


 Applicable rate 1Mbps


 Metal housing, great sealing, and resistant to dust and corrosion 

FL485 signal surge protector is designed by IEC61000-4-5 and ITU-TK20&K21 standard. It adopts multilevel protective circuit and the newest high-speed surge protection device which has quick response, low residual voltage output and excellent transmission performance. The interface adopts standard industrial terminal blocks which is easy to use and suit for all lightning protection in RS-485 communication field.


FL485 signal lightning protector is designed and manufactured on the principle of discharge, limited current, clamping, stabilivolt. When signal wire gets an overvoltage and overcurrent shock, it will put lightning power or its jamming signal into the ground. Overvoltage restriction enables electrical equipment to operate safely within allowable range.


This product adopts metal housing and good sealing, which has anti-dust and anti-corrosion function. It adopts serials connection that can restrain high voltage pulse on the wire to prevent backend device from being damaged by lightning and industrial surge. It can be widely used in remote control and transmission of security monitoring device, digital public broadcast system, water/electricity/gas meter of intelligent community, instrument and all kinds of fields that use RS-485 industrial bus control.

 
Serial Port

 

Standard: EIA RS-485、IEC 61000-4-5、ITU-TK20&K21

Serial port quantity: 1 RS-485 serial port input and output

RS-485 signal: A, B

Interface form: 3-pin industrial terminal blocks

Impact and over-current withstanding: ≤5kA (8/20µs simulated lightning waveform)

Operating voltage: 0~5V

Limited voltage: ≤15V

Applicable rate: 1Mbps

Insertion loss: ≤0.5dB

Response time: ≤1ns

 

Environmental

Limit

 

Operating temperature: -20~60℃

Storage temperature: -25~85℃

Relative humidity: 5%~95% (no condensation)

 

Physical

Characteristic

 

Housing: metal

Dimension (W x H x D): 74mm×25mm×25mm

Weight: 50g

 

Certification

 

CE, FCC, RoHS

 

Warranty

 

1 year

 

  

Unit:mm 

 

Available Models RS-485 (Input) RS-485 (Output) Power Supply
FL485 1 1

-